2" to 3" Series “Tcar” Type Flanges
.660"
.430"
1.090"
.6301"
.6304"
Overall flange thickness
16mm arbor diameter
Back spindle
side
1Blade exposure in mils
(thousandths of an inch)
dicing blade
Finger grip area to
facilitate mounting
on spindle
2Holes to accommodate
disassembly tool
Spanner holes
Front
operator side
2.187TCAR
60
Flange Part
Number Prefix
(inches)
Diamond Blade Size (inches)
O.D.
x
I.D.
Diamond Blade Size (metric)
O.D.
x
I.D.
2TCAR
2.000
1.000
50.8
25.4
2.050TCAR
2.050
1.575
52.1
40.0
2.187TCAR
2.187
1.575
55.5
40.0
2.25TCAR
2.250
1.500
57.2
38.1
2.25MTCAR
2.250
1.575
57.2
40.0
3MTCAR
3.000
1.575
76.2
40.0
3TCAR
3.000
2.000
76.2
50.8
Blade Exposure
(inches)
(mils)
(metric)
0.010
10
0.254
0.015
15
0.381
0.020
20
0.508
0.025
25
0.635
0.030
30
0.762
0.040
40
1.016
0.050
50
1.270
0.060
60
1.524
0.070
70
1.778
0.080
80
2.032
0.090
90
2.286
0.100
100
2.540
0.125
125
3.175
0.150
150
3.810
0.175
175
4.445
0.200
200
5.080
0.250
250
6.350
0.300
300
7.620
0.350
350
8.890
0.400
400
10.160
0.450
450
11.430
0.500
500
12.700
0.550
550
13.900
Material: Titanium
Recommended Torque: 10 in. lbs.
1 Intermediate exposure sizes are available in .005" increments as well as extended hub design for blades thicker than .125". See Technical Section, pg. 4. for blade exposure guidelines.
Chart below indicates maximum exposure for each flange series:
| Flange Part Number | Maximum Blade |
| 2TCAR | 110 |
| 2.050TCAR | 110 |
| 2.187TCAR | 180 |
| 2.25TCAR | 250 |
| 2.25MTCAR | 200 |
| 3MTCAR | 550 |
| 3TCAR | 375 |
2 A blade dismounting tool is required to separate the male and female halves of the flange. The tool is comprised of the Tcar-DT and Tcar-Plunger which is supplied with each flange ordered. The Tcar-PULLER is supplied with the Tcar 864-1. Dicing Saw to facilitate flange removal from the spindle arbor.
An adapter is available for alternating between the resin and metal-bonded hubbed blades to eliminate the need to readjust coolant nozzles and scope positions.